Asphlt emulsifier HT-88
Product manual
HT-88 is a medium-crack cationic asphalt emulsifier, which is easy to use and does not require acid adjustment.
Product specifications
Appearance 25℃ White to light yellow paste
Active substance content 50±1%
Solubility Dissolved in hot water
Typical formula of asphalt emulsifier
Typical formula by mass
Asphalt (%) 50-55
Emulsifier (%) 0.8-1.0
Water (%) increase to 100
How to use asphalt emulsifier
First, add the bitumen into the heating kettle to melt and dehydrate. After removing the impurities, keep it at 135-140℃ for standby use. In addition, add a certain amount of water to the soap tank, heat it to 55-60℃, and add the emulsifier in proportion. After stirring to dissolve the emulsifier uniformly, the above-mentioned base asphalt and emulsifier aqueous solution are pumped to the colloid mill at the same time as required to obtain the cationic emulsified asphalt.
Standard application
HT-88 is a medium-crack cationic asphalt emulsifier, which is widely used in the production of emulsified asphalt for sticky layer oil, permeable layer and sealing layer. It has strong emulsifying ability and good storage stability of emulsified asphalt.
Packaging and storage
50kg plastic drum, usually stored at room temperature, keep well ventilated and prevent sun exposure.